DG2034DN-T1-E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN Exposed Pad |
| Number of Pins | 12 |
| Weight | 21.99923mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.295W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2034 |
| Pin Count | 12 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Power Dissipation | 1.295W |
| Max Supply Current | 1μA |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 35 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 5.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 43pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 30ns, 20ns |
| Charge Injection | -4.4pC |
| Channel-to-Channel Matching (ΔRon) | 160m Ω |
| Crosstalk | -77dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG2034DN-T1-E4 Overview
Shipping overseas is convenient due to the electrical component's packing in 12-VFQFN Exposed Pad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 4:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 12. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. An electrical component of this type can be found in the 12 series. These analog multiplexers are built based on SP4T switching circuits. There are 1 circuits in this switch device. Using the DG2034 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 5.5Ohm. The datasheets for the 12 pins explain the functions. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.8V. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. This electrical part is compatible with 5V operating voltages. There are 4 inputs to be operated.
DG2034DN-T1-E4 Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
DG2034DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG2034DN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Optical Applications
- Fault Tolerant Systems
- Switching Systems
- Precision test equipment
- USB 1.1 signal switching circuits
- Audio signal routing
- Isolation
- Cross Connects
- Communication systems
