DG2042DQ-T1-E3

42ns, 32ns SPST - NO 1.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2042 16 Pins 1nA 2V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2042DQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 612
Description: 42ns, 32ns SPST - NO 1.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2042 16 Pins 1nA 2V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG2042
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	2/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Power Dissipation	450mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	42 ns
Number of Inputs	4
Supply Type	Single
Turn-Off Delay Time	32 ns
On-State Resistance (Max)	1.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	26pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	42ns, 32ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	300m Ω (Max)
Crosstalk	-93dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	82ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Normal Position	NO
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG2042DQ-T1-E3 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. A 2V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with DG2042 to find analog multiplexer variants. An switch multiplexer with 1.5Ohm internal resistance has a value of 1.5Ohm. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. It is recommended to use 1.8V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1nA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The 4 inputs need to be operated in order to work.