DG211CYZT
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 175Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16, 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 460 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 22V |
| Dual Supply Voltage | 15V |
| Off-state Isolation-Nom | 70 dB |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 1999 |
| JESD-609 Code | e3 |
DG211CYZT Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. There are 16 terminations totally. A high-quality output is provided by the electrical component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16, 16 pins. An switch multiplexer with 175Ohm internal resistance has a value of 175Ohm. Multiplexer or Switches is a typical switch device. Analog switch ics with Dual supply type are cost-effective. In order to operate this switch device, it would need a current of 100nA. It may damage the digital multiplexer if the voltage is higher than 10μA. There is no problem with using dual supply voltage, but it should not exceed 22V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It can operate from 15V operating voltages. An environment with a temperature greater than 70°C should not be used to operate the digital switches.
DG211CYZT Features
1 Channels
100nA Supply Current
DG211CYZT Applications
There are a lot of Intersil (Renesas Electronics America) DG211CYZT Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Public switching systems
- Automotive applications
- Isolation
- Avionics test equipment
- RGB switches
- New designs requiring multiplexer functions
- Industrial
- PDAs
- Access Concentrators
