DG211EUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DG211 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 20μA |
| Throw Configuration | SPST |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 175Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 1μs, 500ns |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 500ns |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG211EUE+T Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. A 15V voltage supply should turn on and run the electronic component. This electrical component is included in the 16 series of products. Circuits based on SPST - NC switching are used to construct these analog switch ics. This multiplexer is composed of 4 circuits. Use DG211 to search for variants of the digital switches. A 175Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. Analog switch ics with Dual supply type are cost-effective. It would be sufficient to run this analogue multiplexer with 20μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. When using dual power supplies, you should attach at least 4.5V.
DG211EUE+T Features
1 Channels
Switch Circuit: SPST - NC
20μA Supply Current
DG211EUE+T Applications
There are a lot of Maxim Integrated DG211EUE+T Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Audio signal routing
- Digital Cross-Connects
- Precision test equipment
- Automotive applications
- Digital cross connects (DSX-1)
- Precision data acquisition
- Cell phones
- Cable Modem
- T1/E1 Terminals
