DG213DJ
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 130ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -95dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 60Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Number of Functions | 4 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | 512/+-15V |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 3V |
| Power Dissipation | 470mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 130 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 3V~40V ±3V~22V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 60Ohm |
| Min Dual Supply Voltage | 3V |
DG213DJ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. A total of 16 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPST - NO/NC switching circuits. It has an internal resistance of 60Ohm. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 40V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 3V. It may damage the digital multiplexer if the voltage is higher than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. The voltage should be at least 3V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating the 4 inputs requires 4 inputs.
DG213DJ Features
Switch Circuit: SPST - NO/NC
DG213DJ Applications
There are a lot of Vishay Siliconix DG213DJ Analog Switches & Multiplexers ICs applications.
- Cable PC
- Fiber In The Loop (FITL)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- PDAs
- HDTV
- PBX interfaces
- Microprocessor controlled systems
- DVD-R
- Battery Powered Systems
- Microprocessor Controlled Analog Systems
