DG213DQ-T1-E3

130ns, 100ns SPST - NO/NC 60Ohm Analog Switches BREAK-BEFORE-MAKE DG213 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG213DQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 286
Description: 130ns, 100ns SPST - NO/NC 60Ohm Analog Switches BREAK-BEFORE-MAKE DG213 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	110Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG213
Pin Count	16
Polarity	Non-Inverting
Power Supplies	512/+-15V
Number of Channels	1
Max Supply Voltage	40V
Min Supply Voltage	3V
Operating Supply Current	1μA
Nominal Supply Current	5μA
Power Dissipation	500mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~40V ±3V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	100 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	60Ohm
Min Dual Supply Voltage	3V
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 100ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Height	920μm
Length	5.08mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG213DQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching with DG213 to find analog multiplexer variants. An switch multiplexer with 110Ohm internal resistance has a value of 110Ohm. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 3V. 1μA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. For dual power supplies, a voltage of at least 3V should be attached. Operating the 4 inputs requires 4 inputs.