DG221BDY-E3

550ns, 340ns SPST - NC 90Ohm Analog Switches BREAK-BEFORE-MAKE DG221 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG221BDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 227
Description: 550ns, 340ns SPST - NC 90Ohm Analog Switches BREAK-BEFORE-MAKE DG221 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	90Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG221
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	18V
Min Supply Voltage	13V
Operating Supply Current	800μA
Power Dissipation	600mW
Max Supply Current	1.5mA
Throw Configuration	SPST
Turn On Delay Time	550 ns
Number of Inputs	4
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	340 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	90Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	70 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	550ns, 340ns
Charge Injection	20pC
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG221BDY-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Use DG221 to search for variants of the digital switches. An switch multiplexer with 90Ohm internal resistance has a value of 90Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. An effective Dual supply digital multiplexer. 13V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 800μA current. If put voltage greater than 1.5mA on the device, damage may be caused to the analogue multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 18VIt is recommended that you attach at least 7V to your dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 15V operating voltages. Among the inputs that can be operated are the 4 inputs.