DG2536DN-T1-E4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-DFN (3x3) |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 500mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.191W |
| Base Part Number | DG2536 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Power Dissipation | 1.191W |
| Max Supply Current | 1μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 82 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 73 ns |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 145pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 82ns, 73ns |
| Charge Injection | 21pC |
| Channel-to-Channel Matching (ΔRon) | 50mOhm (Max) |
| Crosstalk | -69dB @ 100kHz |
| Voltage - Supply, Single (V+) | 3V |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
DG2536DN-T1-E4 Overview
Packed in 10-VFDFN Exposed Pad, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. As a result of its 2 channels, this electronic component provides high-quality output. Unlike digital switches, these are based on SPDT switching circuits. Circuits number 2 make up this analogue multiplexer. Using the DG2536 search parameter, you can discover variants of the switch. There is 500mOhm internal resistance in this digital multiplexer. You can find the functions of the 10 pins in the datasheets. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. There should be 1.8V voltage fed to the electrical part below 1.8V. 1μA current would be enough for this multiplexer to operate. This analog switch requires a voltage of 3V to drain from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. It can operate from 3V operating voltages. In order to operate the 2 inputs, there are several steps to follow. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. There are 4 outputs on the analogue multiplexer. Suppliers offer a 10-DFN (3x3) package.
DG2536DN-T1-E4 Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
DG2536DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG2536DN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Communications systems
- SDH
- Public switching systems
- Avionics and Military Systems
- Remote Powered Equipment
- Cable PC
- New designs requiring multiplexer functions
- T1/E1 Terminals
- Mechanical reed relay replacement
- Transmit
