DG2538DQ-T1-GE3

30ns, 35ns SPST - NC 4.5Ohm Analog Switches BREAK-BEFORE-MAKE DG2538 10 Pins 250pA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2538DQ-T1-GE3
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 686
Description: 30ns, 35ns SPST - NC 4.5Ohm Analog Switches BREAK-BEFORE-MAKE DG2538 10 Pins 250pA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	DG2538
Pin Count	10
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	1.25V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Voltage - Supply, Single/Dual (±)	2.6V~4.3V ±2.5V
Supply Type	Dual, Single
Turn-Off Delay Time	20 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	1.25V
High Level Output Current	50mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Normal Position	NC
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Weight	143.193441mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10

DG2538DQ-T1-GE3 Overview

As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 10 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A total of 10 pins are injected into the electrical part body. A SPST - NC switching circuit is used to build these analog multiplexers. The multiplexer consists of 2 circuits. Using the DG2538 search parameter, you can discover variants of the switch. There is 4.5Ohm internal resistance in this digital multiplexer. The functions of 10 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 4.3V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. 1.25V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 2μA. A digital multiplexer may suffer damage if voltage is applied above 2μA. If put voltage greater than 2.75V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 1.25V.