DG2711DL-T1-E3
| Parameters | |
|---|---|
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 60 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 42 ns |
| On-State Resistance (Max) | 600mOhm |
| High Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 56 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 46ns, 38ns |
| Charge Injection | 28pC |
| Channel-to-Channel Matching (ΔRon) | 70m Ω (Max) |
| Crosstalk | -56dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 44ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 600mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2711 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
DG2711DL-T1-E3 Overview
This electronic part is conveniently packaged in 6-TSSOP, SC-88, SOT-363, making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 6. A 1 channel electronic part produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. The electrical component body receives 6 pins. SPDT switching circuits are used in these analog switch ics. DG2711 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 600mOhm. Datasheets for functions of 6 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. 1.6V should be the lowest voltage fed to the electronic component. For this digital switch to work, 10nA current would suffice. Using only a single voltage supply, this analog switch requires 1.6V~3.6V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage. This electrical part is compatible with 3V operating voltages. A 1 input needs to be operated. This digital multiplexer has 2 outputs.
DG2711DL-T1-E3 Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
DG2711DL-T1-E3 Applications
There are a lot of Vishay Siliconix DG2711DL-T1-E3 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Medical systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- PCMCIA cards
- Power routing
- High reliability control systems
- Remote wireless modules
- Data Acquisition Systems
- Channelized and Unchannelized DS3 applications
- Isolation
