DG2715DL-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 1.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2715 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Voltage | 3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.5V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 36 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 33 ns |
| On-State Resistance (Max) | 600mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 57 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 72pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 29ns, 26ns |
| Charge Injection | 9pC |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.5V~3.6V |
| Drain to Source Resistance | 400mOhm |
| Normal Position | NO |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DG2715DL-T1-E3 Overview
As the electronic part is packed in 5-TSSOP, SC-70-5, SOT-353, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. In total, there are 5 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. Into the electrical component body are injected 5 pins. SPST - NO switching circuits are used in these analog switch ics. DG2715 can be used to search for analog multiplexer variants. This digital multiplexer has 1.5Ohm internal resistance. To find out what the functions of 5 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. 1.5V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 10nA. This analog switch requires a voltage of 1.5V~3.6V to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. It is possible to operate 1 inputs. The Drain to Source resistance of this electronic component is 400mOhm.
DG2715DL-T1-E3 Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Drain-to-Source resistance: 400mOhm
DG2715DL-T1-E3 Applications
There are a lot of Vishay Siliconix DG2715DL-T1-E3 Analog Switches & Multiplexers ICs applications.
- CSU
- E1 Multiplexer
- Medical Instrumentation
- Sample-and-hold systems
- E1 Network Equipment
- Precision instrumentation
- FTTH
- Battery-powered systems
- ISDN NT1/TA
- Fiber In The Loop (FITL)
