DG271AK
| Parameters | |
|---|---|
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-CERDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 900mW |
| Current Rating | 2A |
| Operating Supply Voltage | 15V |
| Number of Circuits | 4 |
| Max Supply Voltage | 25V |
| Max Supply Current | 7.5mA |
| Turn On Delay Time | 65 ns |
| Supply Type | Dual |
| Breakdown Voltage | 1.4kV |
| Turn-Off Delay Time | 65 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 65ns, 65ns |
| Charge Injection | -5pC |
| Crosstalk | -100dB @ 100kHz |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 19.56mm |
DG271AK Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-CDIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -55°C~125°C TA. On the other hand, analog switches can be constructed using SPST - NC switching circuits. A total of 4 circuits make up this switch device. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 25V in normal situations. The analog switch ic is of the Dual supply type and is cost-effective. The analogue multiplexer may be damaged if voltage is greater than 7.5mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. Operating voltages of 15V are compatible with the electrical part. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. Suppliers offer a package with 16-CERDIP.
DG271AK Features
Switch Circuit: SPST - NC
DG271AK Applications
There are a lot of Vishay Siliconix DG271AK Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Industrial and process control systems
- Channel Banks
- Medical systems
- PDH Multiplexers
- Optical Applications
- Precision data acquisition
- Battery-powered systems
- Low-Voltage
- Audio/video switches
