DG2732DN-T1-E4

110ns, 30ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2732 10 Pins 1nA 3V 10-VFDFN Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2732DN-T1-E4
Package: 10-VFDFN Exposed Pad
Datasheet: PDF
Stock: 261
Description: 110ns, 30ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2732 10 Pins 1nA 3V 10-VFDFN Exposed Pad(Kg)

Details

Tags

Parameters
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	104pF
On-state Resistance Match-Nom	0.03Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	110ns, 30ns
Charge Injection	9pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-75dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~4.3V
Height	880μm
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Number of Pins	10
Weight	50.008559mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	400mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.191W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2732
Output	SEPARATE OUTPUT
Pin Count	10
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	110 ns
Supply Type	Single
Turn-Off Delay Time	30 ns
On-State Resistance (Max)	450mOhm
Multiplexer/Demultiplexer Circuit	2:1

DG2732DN-T1-E4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-VFDFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. In total, there have been 10 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. There are 10 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. There are 2 circuits in this multiplexer. Search with DG2732 if you are looking for analog multiplexer variants. Analog switches have 400mOhm internal resistance. You can find the functions of the 10 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 4.3V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~4.3V. A digital multiplexer may suffer damage if voltage is applied above 1μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.