DG2739DN-T1-E4

60ns, 50ns SPST - NO/NC 8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG2739 8 Pins 10nA 3V 8-UFQFN

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2739DN-T1-E4
Package: 8-UFQFN
Datasheet: PDF
Stock: 896
Description: 60ns, 50ns SPST - NO/NC 8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG2739 8 Pins 10nA 3V 8-UFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFQFN
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	190mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.4mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2739
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	2.3V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	60 ns
Supply Type	Single
Turn-Off Delay Time	50 ns
-3db Bandwidth	720MHz
On-State Resistance (Max)	8Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	28 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	4.4pF 3.8pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	60ns, 50ns
Charge Injection	10.4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-109dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	70ns
Voltage - Supply, Single (V+)	2.3V~4.3V
Height Seated (Max)	0.6mm
Length	1.4mm
RoHS Status	ROHS3 Compliant

DG2739DN-T1-E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 8. A electrical component with 1 channels is capable of high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 8 pins. Multiplexers built on a SPST - NO/NC switching circuit are built. Circuits number 2 make up this analogue multiplexer. Using the DG2739 search parameter, you can discover variants of the switch. An switch multiplexer with 8Ohm internal resistance has a value of 8Ohm. To find out what the 8 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 4.3V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2.3V. This digital switch can be operated with a current of 1μA. A voltage of 2.3V~4.3V is required to drain this analog switch from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.