DG2741DS-T1-E3

30ns, 28ns SPST - NO 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2741 8 Pins 1nA 1.8V SOT-23-8

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2741DS-T1-E3
Package: SOT-23-8
Datasheet: PDF
Stock: 991
Description: 30ns, 28ns SPST - NO 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2741 8 Pins 1nA 1.8V SOT-23-8(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	MATTE TIN
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	DG2741
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.5V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	81pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 28ns
Charge Injection	5.8pC
Crosstalk	-89dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Voltage - Supply, Single (V+)	1.5V~3.6V
Normal Position	NO
Height Seated (Max)	1.45mm
Width	1.65mm
RoHS Status	ROHS3 Compliant

DG2741DS-T1-E3 Overview

As the electronic part is packed in SOT-23-8, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 8. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. Try searching for the analog switch ic with DG2741 if you are looking for variants. The internal resistance of this digital multiplexer is 8Ohm. For details about the functions of 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 1.5V. The analogue multiplexer could operate on 10nA current. Using a single voltage supply, this switch device consumes 1.5V~3.6V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Among the inputs that can be operated are the 2 inputs. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION.