DG2743DQ-T1-E3

30ns, 28ns SPST - NO/NC 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2743 8 Pins 1nA 1.8V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2743DQ-T1-E3
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 709
Description: 30ns, 28ns SPST - NO/NC 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2743 8 Pins 1nA 1.8V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	MATTE TIN
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2743
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.5V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	81pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	30ns, 28ns
Charge Injection	5.8pC
Crosstalk	-89dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Voltage - Supply, Single (V+)	1.5V~3.6V
Drain to Source Resistance	800mOhm
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG2743DQ-T1-E3 Overview

Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there are 8 terminations. As a result of its 1 channels, this electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 8 pins. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Use DG2743 to search for variants of the digital switches. A 8Ohm internal resistance characterizes this multiplexer. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. A low voltage of 1.5V should be applied to the electronic component. The analogue multiplexer could operate on 10nA current. The voltage required by this switch device is 1.5V~3.6V, draining from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A voltage of 3V can be used to operate the electronic component. Operating the 2 inputs requires 2 inputs. Additional features of the electronic component include: VIDEO APPLICATION. There is 800mOhm Drain to Source resistance on this electronic part.