DG2749DN-T1-E4

25ns, 25ns SPST - NO/NC 600mOhm QUAD Analog Switches BREAK-BEFORE-MAKE DG2749 8 Pins 2nA 3V 8-UFQFN

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2749DN-T1-E4
Package: 8-UFQFN
Datasheet: PDF
Stock: 453
Description: 25ns, 25ns SPST - NO/NC 600mOhm QUAD Analog Switches BREAK-BEFORE-MAKE DG2749 8 Pins 2nA 3V 8-UFQFN(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFQFN
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	600mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	190mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.4mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2749
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	3V
Number of Channels	1
Max Supply Voltage	4.3V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Power Dissipation	190mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	25 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	25 ns
-3db Bandwidth	93MHz
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	75pF 55pF
On-state Resistance Match-Nom	0.03Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	25ns, 25ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	30m Ω (Max)
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~4.3V
Height	550μm
Length	1.4mm
Width	1.4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG2749DN-T1-E4 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. 8 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching for the analog switch ic with DG2749 if you are looking for variants. As far as internal resistance is concerned, it has 600mOhm. The functions of 8 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 4.3V to a switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.6V. This multiplexer would work with 1μA current. This analogue multiplexer requires a voltage of 1.6V~4.3V when it drains from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating 2 inputs is required.