DG2753DQ-T1-E3

60ns, 30ns SPDT 1.2Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2753 16 Pins 2nA 2.7V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2753DQ-T1-E3
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 337
Description: 60ns, 30ns SPDT 1.2Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2753 16 Pins 2nA 2.7V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	600mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.385W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2753
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	3
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	65 ns
Supply Type	Single
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	1.2Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	60ns, 30ns
Charge Injection	-25pC
Channel-to-Channel Matching (ΔRon)	600m Ω (Max)
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Height Seated (Max)	1.041mm
Length	5.075mm
Width	4.4mm
RoHS Status	ROHS3 Compliant

DG2753DQ-T1-E3 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPDT switching circuits. The multiplexer consists of 3 circuits. DG2753 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 600mOhm. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 1.65V. For this multiplexer to operate, 1μA current would be sufficient. This analog switch requires a voltage of 1.65V~4.3V to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.