DG2788DN-T1-E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 525mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG2788 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 525mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 72 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 43 ns |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 49 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 81pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 72ns, 43ns |
| Charge Injection | 87pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height | 750μm |
| Length | 2.6mm |
| Width | 1.8mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
DG2788DN-T1-E4 Overview
The electrical component comes in 16-WFQFN packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:2. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. By its 2 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 16 pins. Circuits based on DPDT switching are used to construct these analog switch ics. A 2 circuit is present in this switch device. Use DG2788 to search for variants of the digital switches. It has an internal resistance of 500mOhm. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 4.3V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. In order to operate this switch device, it would need a current of 1μA. Analogue multiplexers require a 1.65V~4.3V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. Operating the 4 inputs requires 4 inputs. The analog switch ics has 8 outputs.
DG2788DN-T1-E4 Features
2 Channels
Switch Circuit: DPDT
1μA Supply Current
DG2788DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG2788DN-T1-E4 Analog Switches & Multiplexers ICs applications.
- Central office
- Private Branch Exchange (PBX)
- ATM
- Medical Instrumentation
- Industrial
- HDTV
- Precision data acquisition
- Video signal routing
- Communication systems
- High-Voltage
