DG3003DB-T1-E1
| Parameters | |
|---|---|
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 71 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 59 ns |
| On-State Resistance (Max) | 700mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 100pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 71ns, 59ns |
| Charge Injection | 64pC |
| Channel-to-Channel Matching (ΔRon) | 10mOhm |
| Crosstalk | -70dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA |
| Number of Pins | 6 |
| Supplier Device Package | 6-Micro Foot™ (1.5x1) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 700mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 250mW |
| Base Part Number | DG3003 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
DG3003DB-T1-E1 Overview
As the electronic part is packed in 6-WFBGA, international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. By its 1 channels, the electronic component provides high-quality output. These analog multiplexers are built based on SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Search with DG3003 if you are looking for analog multiplexer variants. A 700mOhm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.8V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 100nA current. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. When the digital multiplexer is charged above 1μA, damage can occur. In order to operate the 1 inputs, there are several steps to follow. An environment with a temperature greater than 85°C should not be used to operate the digital switches. There are 2 outputs on the analogue multiplexer. Suppliers offer a package with 6-Micro Foot? (1.5x1).
DG3003DB-T1-E1 Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
DG3003DB-T1-E1 Applications
There are a lot of Vishay Siliconix DG3003DB-T1-E1 Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Automatic test equipment
- Ultrasound
- Switching Systems
- Industrial control systems
- CSU
- Microwave transmission systems
- Data Acquisition Systems
- Avionics and Military Systems
- Private Branch Exchange (PBX)
