DG301AAA/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 10 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Power Dissipation | 450mW |
| Number of Inputs | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Screening Level | 38535Q/M;38534H;883B |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 8pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG301AAA/883 Overview
The electronic part can be shipped overseas conveniently because it is packaged in TO-100-10 Metal Can. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 10. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 10 pins are injected into the electrical part body. Circuits based on SPDT switching are used to construct these analog switch ics. Circuits number 1 make up this analogue multiplexer. It has an internal resistance of 50Ohm. To find out what the functions of 10 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. It is recommended that the electrical component receives a voltage of 13V. Despite this switch device's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 7V. There are 2 inputs to be operated.
DG301AAA/883 Features
Switch Circuit: SPDT
DG301AAA/883 Applications
There are a lot of Vishay Siliconix DG301AAA/883 Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Mechanical reed relay replacement
- Video switching
- Audio and video routing
- E1 Multiplexer
- Automotive applications
- PBX interfaces
- Medical
- Private Branch Exchange (PBX)
- Frame Relay Equipment
