DG301AAK
| Parameters | |
|---|---|
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 8pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 19.56mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.200007g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 825mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Power Dissipation | 825mW |
| Max Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Number of Inputs | 2 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
DG301AAK Overview
Presented in 14-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. Total terminations are 14. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of the design of the 14 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SPDT switching circuits. The multiplexer consists of 1 circuits. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. For details about the functions of 14 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 13V. It may damage the digital multiplexer if the voltage is higher than 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. When using dual power supplies, you should attach at least 7V. A voltage of 15V can be used to operate the electronic component. A 2 input needs to be operated.
DG301AAK Features
Switch Circuit: SPDT
DG301AAK Applications
There are a lot of Vishay Siliconix DG301AAK Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- E1 Network Equipment
- PBXs
- SONET
- Intelligent PBX
- Power routing
- Ultrasound
- Precision data acquisition
- SDH
- Central office
