DG301AAK/883
| Parameters | |
|---|---|
| Switch-on Time-Max | 300ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Power Dissipation | 825mW |
| Number of Inputs | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Screening Level | 38535Q/M;38534H;883B |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 8pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
DG301AAK/883 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-CDIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Increasing operating temperature to around -55°C~125°C TA. 14 terminations have been made so far. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 14 pins are injected into the electrical part body. Circuits based on SPDT switching are used to construct these analog switch ics. A 1 circuit is present in this switch device. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. For functions related to 14 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 36V to a switch device. A low voltage of 13V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 22VWhen using dual power supplies, you should attach at least 7V. The 2 inputs need to be operated in order to work.
DG301AAK/883 Features
Switch Circuit: SPDT
DG301AAK/883 Applications
There are a lot of Vishay Siliconix DG301AAK/883 Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- SONET
- PDAs
- Voice over IP/DSL – Integrated Access Devices, Smart
- DVD-R
- Precision data acquisition
- DSLAMs
- Digital access cross connects
- FTTH
- Cell phones
