DG302AAK
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-CERDIP |
| Weight | 1.200007g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 50Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 825mW |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Max Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 250 ns |
| On-State Resistance (Max) | 50Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 8pC |
| Crosstalk | -74dB @ 500kHz |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DG302AAK Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-CDIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -55°C~125°C TA. Multiplexers built on a DPST - NO switching circuit are built. There are 2 circuits in this switch device. As far as internal resistance is concerned, it has 50Ohm. The datasheets for the 14 pins explain the functions. A cost-effective Dual, Single supply type analogue multiplexer. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. Operating voltages range from 15V. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. There is a 14-CERDIP package offered by suppliers.
DG302AAK Features
Switch Circuit: DPST - NO
DG302AAK Applications
There are a lot of Vishay Siliconix DG302AAK Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cellular phones
- Imaging
- T1/E1 Terminals
- HDTV
- Medical Instrumentation
- Access Concentrators
- Fiber to the Home
- Cable PC
