DG302ACJ+
| Parameters | |
|---|---|
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 19.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG302A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 2 |
DG302ACJ+ Overview
As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around 0°C~70°C TA. 14 terminations have been made so far. Due to its 2 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. A DPST - NO switching circuit is used for these analog switches. A total of 2 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG302A. To find out what the 14 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Providing power to the analogue multiplexer requires a voltage of 5VV.
DG302ACJ+ Features
2 Channels
Switch Circuit: DPST - NO
DG302ACJ+ Applications
There are a lot of Maxim Integrated DG302ACJ+ Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Public switching systems
- Avionics
- Private Branch Exchange (PBX)
- E1 Network Equipment
- Transmit
- Video switching
- SONET
- Multi-Line E1 Interface Cards
- Fiber In The Loop (FITL)
