DG302BDJ-E3

300ns, 250ns DPST - NO 50Ohm Analog Switches BREAK-BEFORE-MAKE DG302 14 Pins 1nA 15V 14-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG302BDJ-E3
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 225
Description: 300ns, 250ns DPST - NO 50Ohm Analog Switches BREAK-BEFORE-MAKE DG302 14 Pins 1nA 15V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	1.620005g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG302
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	230μA
Power Dissipation	470mW
Max Supply Current	1mA
Throw Configuration	DPST
Turn On Delay Time	150 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF 14pF
Switch Circuit	DPST - NO
Switch Time (Ton, Toff) (Max)	300ns, 250ns
Charge Injection	8pC
Crosstalk	-74dB @ 500kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	5.08mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

DG302BDJ-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 14 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is part of the design of the 14 series that this electronic component is included. Based on DPST - NO switching circuits, these analog multiplexers work. There are 2 circuits in this switch device. Try searching for the analog switch ic with DG302 if you are looking for variants. There is 30Ohm internal resistance in this digital multiplexer. Datasheets for 14 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 36V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 13V should be applied to the electronic component. For this multiplexer to operate, 230μA current would be sufficient. If you put voltage higher than 1mA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages range from 15V.