Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-25°C~85°C TA |
Packaging |
Tube |
Published |
2008 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
30V |
Min Supply Voltage |
10V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
18V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
14pF 14pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
300ns, 250ns |
Charge Injection |
12pC |
Crosstalk |
-74dB @ 500kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Voltage - Supply, Dual (V±) |
±5V~18V |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
DG303ABWE Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -25°C~85°C TA. 16 terminations have been made so far. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SPDT switching circuits. 2 circuits are used in this analogue multiplexer. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 30V in normal situations. A low voltage of 10V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 18V. You should attach at least 5V voltage if you are using dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
DG303ABWE Features
2 Channels
Switch Circuit: SPDT
DG303ABWE Applications
There are a lot of Maxim Integrated DG303ABWE Analog Switches & Multiplexers ICs applications.
- Central office
- Battery-powered systems
- Cell phones
- Ultrasound
- Mechanical reed relay replacement
- Communications systems
- E1 Multiplexer
- Channelized and Unchannelized DS3 applications
- Remote wireless modules
- Audio/video switches