DG303ABWE+
| Parameters | |
|---|---|
| Surface Mount | YES |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DG303A |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switch-on Time-Max | 300ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
DG303ABWE+ Overview
Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -25°C~85°C TA. Total terminations are 16. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There are 16 pins injected into the electronic part body. A SPDT switching circuit is used for these analog switches. There are 2 circuits in this switch device. Using the DG303A search parameter, you can discover variants of the switch. In order to power the analogue multiplexer, it requires an input voltage of 5V volts.
DG303ABWE+ Features
2 Channels
Switch Circuit: SPDT
DG303ABWE+ Applications
There are a lot of Maxim Integrated DG303ABWE+ Analog Switches & Multiplexers ICs applications.
- SDH
- Fiber In The Loop (FITL)
- Automatic test equipment
- Switching Systems
- Cell phones
- Avionics test equipment
- Voice over IP/DSL – Integrated Access Devices, Smart
- Avionics and Military Systems
- Sample-and-hold systems
- Battery-powered systems
