DG304ACWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | DG304A |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switch-off Time-Max | 150ns |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG304ACWE+ Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around 0°C~70°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. A 15V voltage supply should turn on and run the electronic component. There is an electrical component included in the 16 series. SPST - NO switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with DG304A if you are looking for variants. This digital multiplexer has 50Ohm internal resistance. Datasheets for 16 pin functions are available upon request. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. A low voltage of 10V should be applied to the electronic component. Despite this switch device's dual supply capability, its voltage should not exceed 18V. With dual power supplies, you should attach at least 5V.
DG304ACWE+ Features
1 Channels
Switch Circuit: SPST - NO
DG304ACWE+ Applications
There are a lot of Maxim Integrated DG304ACWE+ Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Routers
- Signal routing between systems
- DSUs
- Avionics
- T1/E1 Terminals
- Digital access cross connects
- Cellular phones
- Central office
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
