DG305ACWE+
| Parameters | |
|---|---|
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | DG305A |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1nA |
| Max Supply Current | 10μA |
| Turn On Delay Time | 250 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 18V |
DG305ACWE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. Total terminations are 16. A 1 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPDT switching circuits. The circuits in this analogue multiplexer number 1. DG305A can be used to search for analog multiplexer variants. It has an internal resistance of 50Ohm. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Dual, Single supply type digital switch with a low cost. A low voltage of 10V should be applied to the electronic component. This multiplexer would work with 1nA current. A digital multiplexer may suffer damage if voltage is applied above 10μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. It is recommended that you attach at least 5V to your dual power supply. It can operate from 28V operating voltages.
DG305ACWE+ Features
1 Channels
Switch Circuit: SPDT
1nA Supply Current
DG305ACWE+ Applications
There are a lot of Maxim Integrated DG305ACWE+ Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- PBXs
- PBX interfaces
- Cell phones
- High reliability control systems
- Battery Powered Systems
- Medical Instrumentation
- ISDN NT1/TA
- Digital Cross-Connects
- Industrial
