DG306ACJ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG306A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG306ACJ Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around 0°C~70°C TA. Total terminations are 14. The electronic part delivers high-quality output through its 2 channels. A 15V voltage supply should turn on and run the electronic component. As part of its design, the 14 series is equipped with this electronic component. Circuits based on DPST - NO switching are used to construct these analog switch ics. Circuits number 2 make up this analogue multiplexer. Try searching with DG306A to find analog multiplexer variants. This digital multiplexer has 50Ohm internal resistance. For details about the functions of 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. 10V is the lowest voltage the electrical component should receive. For this switch, a dual supply voltage is feasible, but it must not exceed 18VWith dual power supplies, you should attach at least 5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
DG306ACJ Features
2 Channels
Switch Circuit: DPST - NO
DG306ACJ Applications
There are a lot of Maxim Integrated DG306ACJ Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Precision instrumentation
- Digital Cross-Connects
- Isolation
- Data switching
- PBX interfaces
- PCMCIA cards
- SDH
- SDH/SONET multiplexers
- Battery Powered Instruments
