DG307AAK/883B

250ns, 150ns SPDT 50Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1nA 15V 14-CDIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-DG307AAK/883B
Package: 14-CDIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 574
Description: 250ns, 150ns SPDT 50Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 1nA 15V 14-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Through Hole
Package / Case	14-CDIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	50Ohm
Terminal Finish	TIN LEAD
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	20
Output	SEPARATE OUTPUT
Number of Circuits	2
Max Supply Voltage	18V
Min Supply Voltage	5V
Nominal Supply Current	30mA
Max Supply Current	100mA
Turn On Delay Time	250 ns
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	18V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	5V
Screening Level	38535Q/M;38534H;883B
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF 14pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	250ns, 150ns
Charge Injection	12pC
Crosstalk	-74dB @ 500kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Dual (V±)	±5V~18V
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

DG307AAK/883B Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-CDIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -55°C~125°C TA. A total of 14 terminations have been recorded. When a voltage supply of 15V is used, the electronic component should be turned on and run. A SPDT switching circuit is used for these analog switches. It consists of 2 circuits. This digital multiplexer has 50Ohm internal resistance. To find out what the 14 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 18V. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 100mA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. It is recommended that you attach at least 5V to your dual power supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.