DG307ACWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
DG307ACWE Overview
Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. A SPDT switching circuit is used to build these analog multiplexers. There are 2 circuits in this switch device. Providing power to the analogue multiplexer requires a voltage of 5VV.
DG307ACWE Features
1 Channels
Switch Circuit: SPDT
DG307ACWE Applications
There are a lot of Rochester Electronics, LLC DG307ACWE Analog Switches & Multiplexers ICs applications.
- Medical
- DVD-R
- Low-Voltage
- High reliability control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channelized and Unchannelized DS3 applications
- Public switching systems
- Ultrasound
- Mechanical reed relay replacement
- Switching Systems
