DG308ADY-T1-E3

200ns, 150ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG308ADY-T1-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 232
Description: 200ns, 150ns SPST - NO 100Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	78 dB
Channel Capacitance (CS(off), CD(off))	11pF 8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	-10pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG308
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	10μA
Nominal Supply Current	1nA
Power Dissipation	600mW
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	200 ns
Number of Inputs	4
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V

DG308ADY-T1-E3 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. This multiplexer is composed of 4 circuits. Try searching with DG308 if you're looking for variants. The internal resistance of this digital multiplexer is 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. 13V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 10μA current would suffice. Putting voltage greater than 10μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIn the case of dual power supplies, you should connect at least 7V. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 15V are compatible with the electrical part. There are 4 inputs to be operated.