DG308BDJ-E3

200ns, 150ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG308BDJ-E3
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 444
Description: 200ns, 150ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG308
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	22V
Power Supplies	+-15/12V
Number of Channels	1
Max Supply Voltage	44V
Min Supply Voltage	4V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Power Dissipation	470mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	200 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	4V~44V ±4V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	4V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	1.7Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1.7 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	85Ohm
Normal Position	NO
Height	3.81mm
Length	21.33mm
Width	7.11mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG308BDJ-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with DG308 if you are looking for variants. It has an internal resistance of 160Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 44V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 4V. For this digital switch to work, 1μA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 4V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There is a voltage range of 22V operating voltages for the electrical part. In order to operate the 4 inputs, there are several steps to follow. There is 85Ohm resistance between Drain and Source for this electronic part.