DG308BDY
| Parameters | |
|---|---|
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1.7Ohm |
| Crosstalk | -95dB @ 100kHz |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 85Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 640mW |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Power Dissipation | 640mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 200 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±4V~22V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NO |
DG308BDY Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. By its 4 channels, the electronic component provides high-quality output. SPST - NO switching circuits are used in these analog switch ics. There are 4 circuits in this switch device. Internally, this switch multiplexer has a resistance of 85Ohm. You can find the functions of the 16 pins in the datasheets. normally, users should not supply switches with voltages higher than 44V. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 4V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4V. The electrical component supports 4 inputs. Temperatures over 85°C should not be allowed for the multiplexer to operate. The analog switch ics has 4 outputs. It is possible to purchase a 16-SOIC package from suppliers.
DG308BDY Features
4 Channels
Switch Circuit: SPST - NO
DG308BDY Applications
There are a lot of Vishay Siliconix DG308BDY Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Video switching
- Communications systems
- Communication systems
- Cellular phones
- Ultrasound
- Power routing
- Medical
- Audio signal routing
- DSLAMs
