DG309BDJ
| Parameters | |
|---|---|
| Turn On Delay Time | 200 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±4V~22V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1.7 Ω |
| Crosstalk | -95dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Drain to Source Resistance | 100Ohm |
| Normal Position | NC |
| Height | 3.81mm |
| Length | 21.33mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 85Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Power Dissipation | 470mW |
| Max Supply Current | 1μA |
DG309BDJ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component like this is included in the 16 series. The analog switch ics are built using SPST - NC switching circuits. It has an internal resistance of 85Ohm. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 44V. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 4V. When the digital multiplexer is charged above 1μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. If you are using dual power supplies, you should attach at least 4V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The 4 inputs need to be operated in order to work. The Drain to Source resistance of this electronic component is 100Ohm.
DG309BDJ Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 100Ohm
DG309BDJ Applications
There are a lot of Vishay Siliconix DG309BDJ Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Central office
- Isolation
- Access Concentrators
- PDH Multiplexers
- Digital cross connects (DSX-1)
- PCMCIA cards
- Communications systems
- ATM
- Microprocessor controlled systems
