DG3157DL-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DG3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 10.2 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 10.2 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 58 dB |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.31Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 21ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -64dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG3157DL-T1-E3 Overview
The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Using the DG3157 search parameter, you can discover variants of the switch. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. The datasheets for the 6 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 1.65V. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Operating the 1 inputs requires 1 inputs. A analog switch ics with 2 outputs is included.
DG3157DL-T1-E3 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
DG3157DL-T1-E3 Applications
There are a lot of Vishay Siliconix DG3157DL-T1-E3 Analog Switches & Multiplexers ICs applications.
- Isolation
- Microwave transmission systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cross Connects
- Central office
- Data switching
- DVD-R
- E1 Network Equipment
- Industrial control systems
- Communication systems
