DG3157DL-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | PURE MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 2.6 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 2.6 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 58 dB |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.31Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 21ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -64dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG3157DL-T1-GE3 Overview
This electronic part is conveniently packaged in 6-TSSOP, SC-88, SOT-363, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 6. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. The electronic part body is injected with 6 pins. Unlike digital switches, these are based on SPDT switching circuits. Try searching with DG3157 if you're looking for variants. The internal resistance of this digital multiplexer is 15Ohm. Please refer to the datasheets for 6 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There are 1 inputs to be operated. 2 outputs are included in the analogue multiplexer.
DG3157DL-T1-GE3 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz
DG3157DL-T1-GE3 Applications
There are a lot of Vishay Siliconix DG3157DL-T1-GE3 Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Power routing
- Imaging
- Industrial control systems
- MP3 players
- Fiber In The Loop (FITL)
- Precision data acquisition
- Microprocessor controlled systems
- T1/E1 Terminals
- Routers
