DG333ADJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Weight | 2.508989g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 890mW |
| Technology | CMOS |
| Number of Functions | 4 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Max Supply Current | 200μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±4V~22V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 4V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 45Ohm |
| Height | 3.81mm |
| Length | 26.92mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
DG333ADJ Overview
This electronic part is conveniently packaged in 20-DIP (0.300, 7.62mm), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. Totally, there are 20 terminations. As a result of its 4 channels, this electronic component provides high-quality output. A total of 20 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 1 make up this analogue multiplexer. It has an internal resistance of 45Ohm. You can find the functions of the 20 pins in the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 40V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 5V. A digital multiplexer may suffer damage if voltage is applied above 200μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 4V if you are using dual power supplies. There are SEPARATE OUTPUT outputs on this analog switch ic. A Drain to Source resistance of 45Ohm is shown for this electronic part.
DG333ADJ Features
4 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 45Ohm
DG333ADJ Applications
There are a lot of Vishay Siliconix DG333ADJ Analog Switches & Multiplexers ICs applications.
- DVD-R
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cell phones
- Relay Replacement
- High speed data transmission line cards
- Switching Systems
- Sample-and-hold systems
- Audio and video routing
- Video signal routing
- Multiplexers
