DG333ADW-E3

175ns, 145ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG333ADW-E3
Package: 20-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 268
Description: 175ns, 145ns SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE DG333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Weight	800.987426mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	75Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	800mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG333
Pin Count	20
Number of Outputs	8
Polarity	Non-Inverting
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	5V
Operating Supply Current	200μA
Nominal Supply Current	200μA
Power Dissipation	800mW
Max Supply Current	200μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	5V~40V ±4V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	25Ohm
Height	2.34mm
Length	12.8mm
Width	7.49mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG333ADW-E3 Overview

The electrical component comes in 20-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Totally, there are 20 terminations. By its 4 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. There is an electrical component included in the 20 series. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with DG333. A 75Ohm internal resistance characterizes this multiplexer. You can find the functions of the 20 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. Dual, Single supply type digital switch with a low cost. 5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 200μA current. A digital multiplexer may suffer damage if voltage is applied above 200μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. The voltage should be at least 4V if you are using dual power supplies. There is 25Ohm Drain to Source resistance on this electronic part. A analog switch ics with 8 outputs is included.