DG333ALDQ-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 45Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.635mm |
| Output | SEPARATE OUTPUT |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±4V~22V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 4V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DG333ALDQ-T1-E3 Overview
Shipping overseas is convenient with the electronic component packed in TSSOP. High reliability is achieved by using advanced packaging method Tape & Reel (TR). 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. There are 20 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this switch device. The internal resistance of this digital multiplexer is 45Ohm. For details about the functions of 20 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 40V. The lowest voltage the electronic part should receive is 5V. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 4V if you are using dual power supplies. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It is offered by suppliers in package 20-TSSOP.
DG333ALDQ-T1-E3 Features
4 Channels
Switch Circuit: SPDT
DG333ALDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG333ALDQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- SONET
- Avionics
- Cable PC
- Fiber In The Loop (FITL)
- Microprocessor controlled systems
- Remote wireless modules
- Access Concentrators
- Ultrasound
- High reliability control systems
- 65 V DACs
