Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WFBGA |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
7Ohm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Power Dissipation |
719mW |
Technology |
BICMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DG3408 |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1μA |
Power Dissipation |
719mW |
Propagation Delay |
165 ns |
Turn On Delay Time |
162 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
2.7V~12V ±3V~6V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
97 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
7Ohm |
Min Dual Supply Voltage |
3V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
21pF 211pF |
On-state Resistance Match-Nom |
3.6Ohm |
Switch Time (Ton, Toff) (Max) |
70ns, 44ns |
Charge Injection |
29pC |
Channel-to-Channel Matching (ΔRon) |
3.6 Ω (Max) |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
94ns |
Height Seated (Max) |
0.753mm |
Length |
2mm |
Width |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DG3408DB-T2-E1 Overview
This electronic part is conveniently packaged in 16-WFBGA, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. This multiplexer is composed of 1 circuits. Try searching for DG3408 variants of the analog switch ic. There is 7Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 2.7V. The switch device would be able to operate with 1μA current. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. You should attach at least 3V voltage if you are using dual power supply. There are 8 inputs to be operated.
DG3408DB-T2-E1 Features
8 Channels
1μA Supply Current
DG3408DB-T2-E1 Applications
There are a lot of Vishay Siliconix DG3408DB-T2-E1 Analog Switches & Multiplexers ICs applications.
- Medical
- Channelized and Unchannelized DS3 applications
- Automotive applications
- PDAs
- Audio and video routing
- Data Acquisition Systems
- Industrial control systems
- DVD-R
- E1 Multiplexer
- CSU