DG3535DB-T5-E1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFBGA |
| Number of Pins | 10 |
| Supplier Device Package | 10-Micro Foot® (2x1.5) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 400mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 457mW |
| Base Part Number | DG3535 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 82 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 73 ns |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 145pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 82ns, 73ns |
| Charge Injection | 21pC |
| Channel-to-Channel Matching (ΔRon) | 50mOhm (Max) |
| Crosstalk | -69dB @ 100kHz |
| Voltage - Supply, Single (V+) | 2.7V~3.3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG3535DB-T5-E1 Overview
This electronic part is conveniently packaged in 10-WFBGA, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Circuits based on SPDT switching are used to construct these analog switch ics. 2 circuits are used in this analogue multiplexer. Try searching with DG3535 if you're looking for variants. It has an internal resistance of 400mOhm. Please refer to the datasheets for 10 pins functions. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. An operating current of 1nA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 2.7V~3.3V when it drains from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. The switches should not operate in an environment where the temperature is higher than 85°C. Suppliers offer a 10-Micro Foot? (2x1.5) package.
DG3535DB-T5-E1 Features
Switch Circuit: SPDT
1nA Supply Current
DG3535DB-T5-E1 Applications
There are a lot of Vishay Siliconix DG3535DB-T5-E1 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Sample-and-hold systems
- Multi-Line E1 Interface Cards
- Modems
- MP3 players
- DSUs
- Industrial and process control systems
- Audio and video switching
- PDAs
- CSU
