DG3536DB-T5-E1

82ns, 73ns SPDT 400mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE DG3536 10 Pins 2nA 3V 10-WFBGA

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG3536DB-T5-E1
Package: 10-WFBGA
Datasheet: PDF
Stock: 140
Description: 82ns, 73ns SPDT 400mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE DG3536 10 Pins 2nA 3V 10-WFBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-WFBGA
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	400mOhm
Terminal Finish	TIN SILVER COPPER
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	457mW
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG3536
Output	SEPARATE OUTPUT
Pin Count	10
Power Supplies	3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Max Supply Current	1μA
Turn On Delay Time	82 ns
Supply Type	Single
Turn-Off Delay Time	73 ns
On-State Resistance (Max)	400mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	145pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	82ns, 73ns
Charge Injection	21pC
Channel-to-Channel Matching (ΔRon)	50m Ω (Max)
Crosstalk	-69dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	78ns
Voltage - Supply, Single (V+)	2.7V~3.3V
Height Seated (Max)	0.753mm
Width	1.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG3536DB-T5-E1 Overview

Shipping overseas is convenient with the electronic component packed in 10-WFBGA. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there are 10 terminations. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 10 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPDT switching circuits. 2 circuits are used in this analogue multiplexer. Search with DG3536 if you are looking for analog multiplexer variants. This digital multiplexer has 400mOhm internal resistance. Datasheets for 10 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. The switch device would be able to operate with 1nA current. Analogue multiplexers require a 2.7V~3.3V voltage to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. This analog switch ic utilizes SEPARATE OUTPUT output. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION.