DG3539DB-T5-E1

41ns, 37ns SPST - NO/NC 3.5Ohm Analog Switches DG3539 2nA 8-WFBGA

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG3539DB-T5-E1
Package: 8-WFBGA
Datasheet: PDF
Stock: 629
Description: 41ns, 37ns SPST - NO/NC 3.5Ohm Analog Switches DG3539 2nA 8-WFBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WFBGA
Number of Pins	8
Supplier Device Package	8-MicroFoot™ (1.5x1.5)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2015
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	4Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	400mW
Base Part Number	DG3539
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	46 ns
Supply Type	Single
Turn-Off Delay Time	37 ns
-3db Bandwidth	360MHz
On-State Resistance (Max)	3.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	41ns, 37ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	200mOhm (Max)
Crosstalk	-66dB @ 10MHz
Voltage - Supply, Single (V+)	1.8V~5.5V
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG3539DB-T5-E1 Overview

Presented in 8-WFBGA, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. Unlike digital switches, these are based on SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 2. DG3539 can be used to search for analog multiplexer variants. There is 4Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.8V. 1nA current would be enough for this multiplexer to operate. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. It is possible to purchase a 8-MicroFoot? (1.5x1.5) package from suppliers.