DG3540DB-T1-E1

41ns, 37ns SPST - NO/NC 3.5Ohm Analog Switches DG3540 2nA 8-WFBGA

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG3540DB-T1-E1
Package: 8-WFBGA
Datasheet: PDF
Stock: 290
Description: 41ns, 37ns SPST - NO/NC 3.5Ohm Analog Switches DG3540 2nA 8-WFBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WFBGA
Number of Pins	8
Supplier Device Package	8-MicroFoot™ (1.5x1.5)
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	4Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	400mW
Base Part Number	DG3540
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	46 ns
Supply Type	Single
Turn-Off Delay Time	37 ns
-3db Bandwidth	360MHz
On-State Resistance (Max)	3.5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	8pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	41ns, 37ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	200mOhm (Max)
Crosstalk	-66dB @ 10MHz
Voltage - Supply, Single (V+)	1.8V~5.5V
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG3540DB-T1-E1 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-WFBGA. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. Unlike digital switches, these are based on SPST - NO/NC switching circuits. The multiplexer consists of 2 circuits. Try searching with DG3540 if you're looking for variants. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexer with a Single supply type that is cost-effective. 1.8V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 1nA. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. Suppliers offer a package with 8-MicroFoot? (1.5x1.5).