DG381AAK/883B
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Analog IC - Other Type | SPDT |
| Max Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
DG381AAK/883B Overview
Shipping overseas is convenient due to the electrical component's packing in 14-CDIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -55°C~125°C TA. There are 14 terminations totally. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 14 pins. A SPST - NC switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. The functions of 14 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 36V should not normally be supplied to the switches. 10V is the lowest voltage that should be fed to the electronic electronic part. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. You should attach at least 5V voltage if you are using dual power supply. It is integrated with a SPDT analog IC. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical part is compatible with 15V operating voltages.
DG381AAK/883B Features
1 Channels
Switch Circuit: SPST - NC
DG381AAK/883B Applications
There are a lot of Maxim Integrated DG381AAK/883B Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Private Branch Exchange (PBX)
- Medical Instrumentation
- Audio and video routing
- T1/E1 Terminals
- SDH/SONET multiplexers
- Communication systems
- Access Concentrators
- Industrial
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
