DG381ACWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DG381A |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Normal Position | NC |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
DG381ACWE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.295, 7.50mm Width). High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. Try searching with DG381A to find analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Analog switch ics need a voltage of 5V to be powered.
DG381ACWE Features
1 Channels
Switch Circuit: SPST - NC
DG381ACWE Applications
There are a lot of Maxim Integrated DG381ACWE Analog Switches & Multiplexers ICs applications.
- Transmit
- SONET/SDH ADM
- Medical Instrumentation
- Avionics
- 65 V DACs
- Relay replacements
- Communications systems
- ATM
- Avionics test equipment
- Multi-Line E1 Interface Cards
