DG381ACWE+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG381A |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 25V |
| Operating Supply Current | 230μA |
| Nominal Supply Current | 230μA |
| Max Supply Current | 500μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG381ACWE+ Overview
Packed in 16-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 15V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. Unlike digital switches, these are based on SPST - NC switching circuits. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with DG381A. This digital multiplexer has 50Ohm internal resistance. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 25V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. This multiplexer would work with 230μA current. If you put voltage higher than 500μA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 18VWith dual power supplies, you should attach at least 5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages of 15V are compatible with the electrical part.
DG381ACWE+ Features
1 Channels
Switch Circuit: SPST - NC
230μA Supply Current
DG381ACWE+ Applications
There are a lot of Maxim Integrated DG381ACWE+ Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- PBX interfaces
- PCMCIA cards
- Central office
- Public switching systems
- Multiplexers
- Isolation
- Signal routing between systems
- Digital access cross connects
- Cellular phones
